Tel :+86-18059296519

E-mel : [email protected]

Malay Malay

APA YANG ANDA CARI?

304 Paip Keluli Tahan Karat Tiub Penutup Hujung Kimpalan Punggung Bebibir Paip Borong Batang Logam Bulat Berkelayakan

Produk

Rumah Produk Bebibir Keluli Bebibir Plat

Plate flange

Plate flange is also named plain flange, flat flange and slip on flange etc. A plate flange is a flat, circular disk that is welded onto the end of a pipe and allows it to be bolted to another pipe. Typically used in fuel and water pipelines, the two plate flanges will be bolted together with a gasket in between them. The plate flange will have bolt holes all around the perimeter and will be used to create junctions, tees and joints.

Saiz :
1/2''-48''
Standard :
ANSI, JIS, DIN, BS,GOST
bahan :
Nickel Alloy, Duplex Steel, Stainless Steel
Tekanan :
CLASS 150, CLASS 300, CLASS 600, CLASS 900,CLASS 1500, CLASS 2500, CLASS 3000
Jenis muka :
F.F., R.F., R.T.J. ,M.F.,T.G.

Tanya Sekarang

KATEGORI PRODUK

Bagaimanakah kami boleh membantu anda

Tel : +86-18059296519

Whatsapp : +8618059296519

E-mel : [email protected]

HUBUNGI KAMI

produk baru

Penutup Akhir SUS304 Berkualiti Tinggi-EC1
BACA LAGI

Maklumat produk

Plate Flange

When building a pipeline, the length of the pipes used are not always known. By manufacturing the pipe separate from the plate flange, the welders can cut the pipe to length and weld a plate flange in place to join the pipes at any needed length. The plates can also be welded to the pipe on a slight bias, allowing two pipes to be joined that may not be precisely lined up.

plate flange designs are uniform in any given size regardless of materials used to create them. This allows a 6-inch (15 cm) black pipe flange to mate perfectly with a 6-inch stainless steel flange. The plate flanges will have a serrated finish on the inside mating surface, which allows the plate to seat into the gasket material. This ensures a perfect seal between two joining pipes.

For applications with no/low pressure at ambient temperatures, plate flanges are often a cost effective solution when raised faces and hubs are not necessary.

HOT TAGS : threaded flange Bebibir Keluli Tahan Karat carbon steel flange blind plate flange

tinggalkan pesanan

Jika anda berminat dengan produk kami dan ingin mengetahui butiran lanjut, sila tinggalkan mesej di sini, kami akan membalas anda secepat mungkin.

Produk Berkaitan

Bebibir Plat Keluli Tahan Karat-WS1

Bebibir plat juga dinamakan bebibir biasa, bebibir rata dan bebibir gelincir dan lain-lain. Bebibir plat ialah cakera bulat yang rata yang dikimpal pada hujung paip dan membolehkannya disambungkan ke paip lain. Biasanya digunakan dalam saluran paip bahan api dan air, kedua-dua bebibir plat akan diikat bersama dengan gasket di antaranya. Bebibir plat akan mempunyai lubang bolt di sekeliling perimeter dan akan digunakan untuk membuat simpang, tee dan sambungan.